B - Ardiehl.de

HYDRAULIC CONTROL VALVE (Cont’d)
Lift Spool and Detent (Cont’d)
Put grease on all the detent component surfaces before
assembly [A].
Install the detent balls and spring into the detent adapter.
Hold the detent balls in position with the tool (MEL1278)
and install the detent adapter into the end cap [B].
Install the new spool seal (Item 1) [C] and backup washer
(Item 2) [C].
Install the centering spring, end cap/detent adapter on the
valve spool. Tighten the detent adapter to 90–100 in.–lbs.
(10,2–11,3 Nm) torque [D].
–2–38–
A
B
C
D
1
2
CD–15049
CD–15050
CD–15047
CD–15045
853, 853H BICS Loader
Service Manual