B - Ardiehl.de

HYDROSTATIC PUMP (Cont’d)
Disassembly (Cont’d)
Mark the position of the neutral bracket for reference
during assembly [A].
NOTE: Removal of any part of the mechanical
control will result in the loss of the neutral
setting and will require neutral adjustment.
Refer to Page 3–9 for the correct neutral
adjustment procedure. The neutral
adjustment procedure must be performed
with the pump installed and engine running.
Remove the flange head screw [B].
Remove the control lever and spool assembly [C].
If necessary, remove the spring from the control lever and
spool assembly [D].
Revised June 96
A
B
C
D
CD–00065
CD–00066
CD–00067
CD–00111
853, 853H BICS Loader
–3–39– Service Manual