B - Ardiehl.de

DRIVE BELT (Cont’d)
Replacing the Drive Belt
Raise the operator cab. (See Page 1–1.)
Remove the belt shield. (See Page 3–62.)
Loosen the bolt (Item 1) [A] on the idler pulley tensioner
mounting bracket.
Loosen the jam nut (Item 2) [A] and turn the nut (Item 3)
[A] to release the belt tension.
Remove the drive belt from the hydrostatic pump pulley
and flywheel pulley.
Remove the drive belt [B].
Installation: Install the new drive belt and adjust. (See
Page 3–63.)
–3–64–
A
B
2
3
1
P–04926
B–05095
853, 853H BICS Loader
Service Manual