B - Ardiehl.de

TILT LOCK VALVE (Cont’d)
Disassembly and Assembly
Remove the solenoid mounting nut (Item 1) [A], solenoid
(Item 2) [A] and solenoid valve (Item 3) [A] from the tilt
lock valve.
Remove the check valve (Item 1) [B] from the lift lock
valve.
Assembly: Tighten the solenoid mounting nut to 80–90
in.–lbs. (9–10 Nm) torque.
Inspect the solenoid valve, check valve and hydraulic
fittings for damage or wear. Replace if necessary.
Refer to Page 8–1 for lift arm by–pass control inspection
procedure.
–8–20–
A
B
3 1
1
2
P–04115
P–04114
853, 853H BICS Loader
Service Manual