B - Ardiehl.de

LIFT LOCK BY–PASS VALVE (Cont’d)
Removal and Installation (Cont’d)
Remove and replace the by–pass valve mounting bracket
(Item 1) [A] if necessary.
Reverse the removal procedure to install the lift lock
by–pass valve in the loader.
Always clean up spilled fuel or oil. Keep heat,
flames, sparks or lighted tobacco away from
fuel and oil. Failure to use care around
combustibles can cause explosion or fire
which can result in injury or death. W–2103–1285
Disassembly and Assembly
Remove the by–pass valve (Item 1) [B] from the valve
block. Inspect the by–pass valve for damage and replace
if necessary.
Remove the check valve (Item 2) [B] from the valve block.
Inspect the check valve for damage and replace if
necessary.
Inspect the hydraulic fittings on the valve block for
damage and replace if necessary.
–8–18–
A
B
1
2
1
P–04745
P–04096
853, 853H BICS Loader
Service Manual