B - Ardiehl.de

ENGINE (Cont’d)
Removal and Installation (Cont’d)
Disconnect the wires (Item 1) [A] at both filters.
Disconnect the BICS wiring harness connectors (Item
2) [A] from the engine electrical harness.
Disconnect the wiring connector (Item 3) [A].
Disconnect the electrical harness connectors (Item 1)
[B].
NOTE: The electrical harness will be removed with
the engine.
Remove the bolt from the harness clip (Item 2) [B].
Disconnect the hose (Item 1) [C] from the oil cooler.
Disconnect the hose (Items 2 & 3) [C] from the
hydrostatic pump.
When making repairs on hydrostatic and
hydraulic systems, clean the work area before
disassembly and keep all parts clean. Always
use caps and plugs on hoses, tubelines and
ports to keep dirt out. Dirt can quickly damage
the system.
I–2003–0284
A
2
B
C
2
1
1
1
2
3
3
P–04871
P–04860
P–04867
853, 853H BICS Loader
–7–29– Service Manual