B - Ardiehl.de

ENGINE
Removal and Installation
Raise the lift arms and install an approved lift arm support
device. (See Page 1–1.)
Raise the operator cab. (See Page 1–1.)
Disconnect the case drain hose (Item 1) [A] and drain the
hydraulic fluid into a container.
After the fluid is removed from the reservoir, loosen both
hose clamps and remove the hose (Item 2) [A] from the
reservoir and hydrostatic pump.
Loosen both hose clamps and remove the fuel vent hose
(Item 1) [B].
Loosen both hose clamps and remove the fuel fill hose
(Item 2) [B].
Remove the fan drive belt (Item 1) [C].
Loosen the hose clamps and remove the hose (Item 1)
[D] from the filter and the hydrostatic pump.
–7–28–
A
B
C
D
1
2
2
1
1
P–04856
1
P–04855
P–04863
P–04861
853, 853H BICS Loader
Service Manual