B - Ardiehl.de

ELECTRICAL SYSTEM INFORMATION
Description
The loader has a 12 volt, negative ground alternator
charging system. The electrical system is protected by
fuses (Item 1) [A] located in the engine compartment. The
fuses will protect the electrical system when there is an
electrical overload. The reason for the overload must be
found before starting the engine again.
Fuse Location (Standard & BOSS® Option)
The electrical system for loaders is protected by eight
fuses located in the fuse block (Item 1) [B]. Remove the
fuse block cover to access the fuses.
The decal inside the rear door specifies the fuse sizes
used in various loader circuits [C].
Always check for pinching, rubbing or
abrading of wire harnesses. Route away from
and use nylon tie straps to hold the harness
away from hot or moving parts.
I–2114–0596
–6–4–
A
B
C
1
AUX.
1
CD–15011
CD–15007
6707786
853, 853H BICS Loader
Service Manual