B - Ardiehl.de

CAMSHAFT GEAR
Removal and Installation
Remove the timing gearcase cover. (See Page 7–69.)
Remove the idler gear. (See Page 7–71.)
Remove the bolt at the camshaft gear [A].
Installation: Tighten the bolt to 72–87 ft.–lbs. (98–118
Nm) torque.
Install the puller and remove the gear [B].
Remove the bolts at the retainer plate [C].
Installation: Tighten the bolts to 11–17 ft.–lbs. (15–23
Nm) torque.
Remove the retainer plate [D].
Installation: Check the camshaft end play.
Standard – 0.002–0.0045 inch (0,05–0,114 mm)
Limit – 0.0079 inch (0,2 mm)
–7–74–
A
B
C
D
B–08931
B–08932
B–08980
B–08979
853, 853H BICS Loader
Service Manual