B - Ardiehl.de

TIMING GEARCASE
853, 853H BICS Service Manual #6724012 – Engine Service Section Part 3 of 4
Removal and Installation
Remove the timing gearcase cover. (See Page 7–69.)
Remove the idler gear. (See Page 7–71.)
Remove the fuel injection pump. (See Page 7–40.)
Remove the fuel injection pump idler gear. (See Page
7–73.)
Remove the camshaft gear. (See Page 7–74.)
Remove the water pump. (See Page 7–83.)
Remove the oil pan. (See Page 7–79.)
Remove the bolts at the timing case [A].
Installation: Tighten the bolts to 11–17 ft.–lbs. (15–23
Nm) torque.
Remove the timing case [B].
Installation: After the timing case cover is installed with
the new gasket, cut the excess gasket at the engine block
[C].
A
B
C
B–08925
B–08937
B–08952
853, 853H BICS Loader
–7–75– Service Manual