B - Ardiehl.de

HYDRAULIC FLUID RESERVOIR
Removal and Installation
Raise the operator cab. (See Page 1–1)
Disconnect the hose (Item 1) [A] at the case drain filter
and drain the fluid into a container.
Loosen the hose clamp and disconnect the reservoir
outlet hose (Item 1) [B].
Disconnect the case drain hose (Item 2) [B] at the
reservoir.
Remove the bolt and plate from the mounting strap (Item
1) [C] & [D].
Installation: Tighten the bolt to 16–20 ft.–lbs. (21–27
Nm) torque.
Remove the mounting strap.
Remove the hydraulic reservoir from the loader.
A
B
C
D
1
1
1 2
1
CD–15130
P–04856
CD–15132
P–4858
853, 853H BICS Loader
–2–65– Service Manual