B - Ardiehl.de

HYDROSTATIC FILTER HOUSING
Removal and Installation
When making repairs on hydrostatic and
hydraulic systems, clean the work area before
disassembly and keep all parts clean. Always
use caps and plugs on hoses, tubelines and
ports to keep dirt out. Dirt can quickly damage
the system.
I–2003–0284
Disconnect the wires (Item 1) [A] from the sender.
Disconnect the tubelines (Items 2 & 3) [A].
Disconnect the hose (Item 1) [B].
Remove the four mounting bolts (Item 2) [B].
Installation: Tighten the mounting bolts to 25 ft.–lbs. (34
Nm) torque.
Remove the filter/filter housing assembly.
Always clean up spilled fuel or oil. Keep heat,
flames, sparks or lighted tobacco away from
fuel and oil. Failure to use care around
combustibles can cause explosion or fire
which can result in injury or death. W–2103–1285
–2–66–
A
B
1
2
3
1
2
1
P–04871
P–04853
853, 853H BICS Loader
Service Manual