B - Ardiehl.de

BATTERY
Removal and Installation
Batteries contain acid which burns eyes and
skin on contact. Wear goggles, protective
clothing and rubber gloves to keep acid off
body.
In case of acid contact, wash immediately with
water for several minutes and get medical
attention in case of eye contact.
W–2065–1286
Open the rear door.
Disconnect the negative(–) cable (Item 1) [A] from the
battery.
Disconnect the positive (+) cable (Item 1) [B] from the
battery.
Remove the nuts from the holddown clamp (Item 2) [B]
and remove the battery holddown clamp.
Remove the battery from the loader [C].
Keep arcs, sparks, flames and lighted tobacco
away from batteries. When ‘‘jumping’’ from
booster battery make final connection
(negative) at engine frame.
Do not jump start or charge a frozen battery.
Warm battery to 60°F. (16°C.) before connecting
to a charger. Unplug charger before connecting
or disconnecting cables to battery.
Battery gas can explode and cause serious
injury.
W–2066–0490
Always clean the terminals and cable ends when
installing a new battery [D].
When installing the battery in the loader, do not touch any
metal parts with the battery terminal posts.
Connect and tighten the battery cables. Connect the
negative (–) cable last to prevent sparks.
A
B
C
D
1
2
1
P–00744
CD–15008
CD–15136
CD–15137
P–00746
853, 853H BICS Loader
–6–5– Service Manual