B - Ardiehl.de

HYDRAULIC CONTROL VALVE (Cont’d)
Auxiliary Electric Solenoid
Remove the nut (Item 1) [A] from the end of the solenoid.
Assembly: Tighten the nut to 9–12 in.–lbs. (1,02–1,36
Nm) torque.
Remove the solenoid metal housing [B].
Remove the solenoid coil and end plate [C].
Remove the electric solenoid valve (Item 1) [D].
Assembly: Tighten the electric solenoid valve to 96–144
in.–lbs. (10,8–16 Nm) torque. Always install new O–rings
and backup washers.
–2–42–
A
B
C
D
1
1
CD–15059
CD–15060
CD–15061
CD–15062
853, 853H BICS Loader
Service Manual