Pneumatic Clean Series

SeriesHow to Order11-12-CXSJDual Rod Cylinder/Compact Typeø6, ø1010312CXS J L 6 50 A93S1112Clean seriesVacuum suction typeRelief typeCompact typeM∗ LBearingSlide bearingBall bushing bearing∗Only ball bushing and bearingis available with series 12-.Number of auto switchesNilSnBore size/StrokeBore sizeStandard stroke610, 20, 30, 40, 501010, 20, 30, 40, 5021nType of auto switchNil Without auto switch (Built-in magnet)∗Select the applicable auto switch from the table below.(mm)Auto Switch SpecificationsStyleReed switchSolid state switchSpecialfunction——ElectricalentryGrommetGrommet∗Lead wire symbol 0.5m·········Nil (Example) A933m·········LA93L(Refer to CAT.ES20-53 E for detailed specifications and auto switches not in the following table.)IndicatorLoad voltage Switch model Lead wire length (m) ∗WiringElectrical entry direction(Output) DC AC0.5 3 5Horizontal(Nil) (L) (Z)Applicable loadYes 2-wire 24V 12V 100V A93 — — Relay,PLCYes3-wire (NPN)24V12V—F9N — —Relay,PLC2-wire 12VF9B — —SpecificationsBore size (mm)FluidProof pressureMax. operating pressureMin. operating pressureAmbient and fluid temperaturePiston speedCushionStroke adjustable rangePort size60.15MPaAir (Non-lube)1.05MPa0.7MPa–10°C to 60°C (With no condensation)30 to 400mm/sRubber bumper0 to –5 mm on standard strokeM3 X 0.5100.1MPaM5 X 0.8∗The maximum piston operating speeds given in the table above are for the extending side.The maximum piston operating speed for the retracting side are approximately 70% those of theextending side.84