Pneumatic Clean Series

Solenoid Valve 10-SYJ5000346ModelBody ported typeBase mounted typeValve10-SYJ523- -M510-SYJ523- -C410-SYJ523- -C6SpecificationsFluidOperating2 position singlepressure range2 position doubleMPa3 positionAmbient and fluid temperature °CNote1) Response time ms(0.5MPa)2 position single, Double3 positionMax. operating 2 position single, DoubleFrequency Hz3 positionManual overridePilot exhaust methodLubricationMounting orientationNote2) Impact/Vibration resistance m/s 2EnclosureAir0.15 to 0.70.1 to 0.70.15 to 0.7Max. 5025 or less40 or less53Non-locking push type, Push-turn-locking slotted typeCommon exhaust (Pilot and main valves)Not requiredfree150/30Dust proofNote1) According to JIS B8375-1981 dynamic performance test (With coil temperature of 20°C, at rated voltage and without surge voltage suppressor)Note2) Shock resistance: No malfunction resulted in an impact test using a drop impact tester.The test was performed each time in the axial and right angle directions of the main valve and armature, for both energized and deenergized states.Impact resistance: No malfunction resulted from a one-sweep test between 8.3 and 2000Hz. The test was performed on the axis and right angle directions of the mainvalve and armature, for both energized and de-energized states. (Value in the initial stage).Solenoid SpecificationsElectrical entryRated coil voltage VAllowable voltage fluctuationNote) Power consumption WApparent power VAActuationSingle2 positionDoubleClosed center3 position Exhaust centerPressure centerSingle2 positionDoubleClosed center3 position Exhaust centerPressure centerSingle2 positionDoubleClosed center3 position Exhaust centerPressure centerSingle2 positionDouble10-SYJ543- -01 Closed center3 position Exhaust centerPressure centerNote 1) Values in [ ] are for the normal position. A, BR1, R2 applies to the exhaust center while PA, B applies to the pressure center.Note 2) Values in ( ) are for types without sub-plate.Note 3) Values are for DC voltages. For AC voltages, add 1 g to the weight of the single solenoid and 2 g to the weight of the double solenoid and 3 position styles.ACDC50/60Hz ACDC100V110V[115V]200V220V[230V]Surge voltage suppressorIndicator light∗ 110VAC and 115VAC are common, as are 220VAC and 230VAC.Note) At rated voltageFlow characteristics Note1) Weight g Note2, 3)Port size14/2(PA/B)4/25/3(A/BEA/EB)L/MGrommet typeC[dm 3 /(s·bar)] b Cv C[dm 3 /(s·bar)] b Cvplug connector43 450.47 0.41 0.13 0.47 0.41 0.1358 62M5 X 0.8 0.49 0.44 0.13 0.44 0.40 0.120.46 0.37 0.12 0.47[0.39] 0.43[0.35] 0.13[0.10] 69 730.49[0.39] 0.51[0.38] 0.14[0.10] 0.45 0.42 0.1250 52A/B port: C4 0.69 0.39 0.18 0.44 0.39 0.1265 69(ø4 Onetouchfitting) 0.69 0.40 0.19 0.43 0.40 0.12P/R port 0.56 0.40 0.15 0.41[0.41] 0.37[0.37] 0.10[0.11] 76 80:M5 X 0.8 0.57[0.41] 0.4[0.37] 0.15[0.10] 0.41 0.37 0.10A/B port: C6(ø6 Onetouchfitting)P/R port:M5 X 0.8Rc1/80.700.720.670.360.370.540.190.190.190.82[0.44] 0.41[0.39] 0.23[0.12]0.790.800.710.210.280.260.190.180.180.99[0.47] 0.29[0.38] 0.24[0.12]0.470.440.41[0.41]0.410.830.861.1[0.60]0.720.400.340.38[0.38]0.360.320.340.24[0.44]0.380.120.120.11[0.11]0.110.210.200.26[0.18]0.1850 5265 6976 8077 (43) 79 (45)92 (58) 96 (62)103 (69) 107 (73)Grommet(G)/(H) , L plug connector (L), M plug connector (M)24, 12, 6, 5, 3∗100, 110, 200, 220±10% of rated voltage0.5 (With light: 0.55)0.9 (With light: 1.0)1.0 (With light: 1.1)[1.1 (With light: 1.2)]1.8 (With light: 1.9)1.9 (With light: 2.0)[2.2 (With light: 2.3)]DiodeLED327DirectionalControl Valve