Pneumatic Clean Series

Series 10-KGOne-touch Fittings Stainless Specifications571ConstructionGuideColletChuckLarge holding forceSecure engagement with chuck andlarge holding force with collet.Release Button (White)Small disconnecting forceReleases the chuck and collet when the fittingis removed. Also prevents the chuck frombiting excessively into the tube.SealApplicable to low vacuum to1.0 MPa pressureSpecial profile ensures sealing andreduces resistance when the tube isinserted.TubingBody (White)O-ringStudEffective when piping in a confined spaceThe body and threaded portion can turn independently.Stainless specification compatible withanti-corrosive environmentSUS303 stainless steel adopted formetal elementsSuitable for use in CRT production lineswhere contact with copper must beavoided, food processing machineswhere water or salt water splashes andclean room where discoloration ofcopper material and corrosion must beavoided.Applicable TubingTubing materialTubing O.D.SpecificationsPolyurethaneø4, ø6, ø8, ø10, ø12FluidAirMax. operating pressure1.0MPaOperating vacuum pressure–100kPaProof pressure3.0MPaAmbient and fluid temperature–5 to 60°C, In case of water 0 to 40°C(No freezing)Mounting partJIS B 0203 (Tapered pipe thread)ThreadsNut part JIS B0211, 2 classes (Metric fine screw thread)Note) Thread sealWith or without sealantNote) Suffix "S" to the part number if sealant is desired.Main Parts MaterialBodyStudChuckGuideCollet, Release buttonSeal, O-ringSUS303, PBTSUS303 (Thread part)SUS304SUS304, SUS303, POMPOMNBRCautionRefer to pages 7 to 16 of Front matter for safety instructions and common precautions for clean series and pages512 and 513 for common precautions for fittings.552