Pneumatic Clean Series

Solenoid Valve 10-SZ3000How to Order for Manifold Assemblies (Example)Example (SZ3000, positive common with power supply terminals)262Double solenoid (24VDC)10-SZ3260-5LOZ-C6 (3 sets)Supply exhaust block(U side mounting)Single solenoid (24VDC)10-SZ3160-5LOZ-C6 (2 sets)Plug-in manifold with powersupply terminals10-SS5Z3-60PD2-05U-P1 2 3 StationsD side U sideManifold SpecificationsModelManifold modelP(SUP), R(EXH) systemValve stations (with power terminal)Piping specifications Locationof A and B ports DirectionP/R portsPort sizeA/B portsApplicable connectorInternal wiring10-SS5Z3-60PD2-05U-P ··········· 1 set (Manifold part No.)∗ 10-SZ3160-5LOZ-C6 ············· 2 sets (Single solenoid part No.)∗ 10-SZ3260-5LOZ-C6 ············· 3 sets (Double solenoid part No.)∗ To order valves and options mounted onto the manifold at the factory,prefix the part number of the solenoid valve and other equipment withan asterisk (∗).• The layout of valves starts with station 1 on the D side.• Specify the valves to be installed below the manifold part number, starting from station 1 andproceeding in order as shown in the drawing. If the layout is complicated, give descriptions ona manifold specification sheet.Weight W (g) Note 3)n1: Stationsn2: Number of supply/exhaust blocksm: DIN rail weightD-sub connectorType 60FFlat ribbon cable type Type 60PType 60P Type 60PG Type 60PHPlug-in typeCommon supply/exhaust2 to 20 stations 2 to 16 stations 2 to 8 stationsValveSide, Top, DownC8C4, C6, M5Flat ribbon cable Flat ribbon cable Flat ribbon cableconnector Socket: 26 Pin connector Socket: 20 Pin connector Socket: 10 PinMIL type with strain MIL type with strain MIL type with strainrelief MIL-C-83503compliantrelief MIL-C-83503compliantrelief MIL-C-83503compliantD-sub connectorMIL-C-24308JIS-X-5101compliant+COM, –COMW=3.2n1+53n2+m+126.5Note 1) In case many valves are operated simultaneously, use type B (Double side supply/exhaust), applying pressureto the P ports on both sides and exhausting from the R ports on both sides.Note 2) The weight W is the value for the D-SUB connector manifold with power supply terminals only. To obtain theweight with solenoid valves attached, add the solenoid valve weights given on page 244 for the appropriate number of stations.Flow CharacteristicsPort sizeFlow charcteristics1,5,3 4,212/4 (PA/B)4/23 (A/BR)(P,EA,EB) (A,B) C[dm 3 /(s·bar)] bCv C[dm 3 /(s·bar)] bCvC8C4C6M50.58[0.49]0.73[0.64]0.60[0.57]0.26[0.36]0.24[0.27]0.38[0.35]0.14[0.13]0.18[0.16]0.17[0.15]0.76[0.65]0.77[0.74]0.67[0.58]0.15[0.20]0.19[0.16]0.16[0.39]0.18[0.15]0.19[0.19]0.16[0.16]Note) Value is for manifold base with 5 stations and individually operated 2 position type.[ ] : 4 position dual 3 port valve.243DirectionalControl Valve