Pneumatic Clean Series

Miniature One-touch Fittings 10-KJ544ModelHex. Socket HeadMale Connector10-KJSThe hexagon socketof the body is used totighten the maleconnector with ahexagon wrench ina confined space.Bulkhead Union10-KJEUsed for relayconnection from onetubing to anotheracross a panel.Extended Male Elbow10-KJWUsed basically in thesame way as astandard male elbowbut also to extend theelbow over a standardone for ease ofconnection anddisconnection of tubing.Male Connector10-KJHUsed to pipe in thesame direction froma female threadedportion.Most common type.Plug-in Elbow10-KJLUsed to change thetubing entry ofOne-touch fittingsby 90°.Union "Y"10-KJUUsed to branch a tubingin the same direction.Female Connector10-KJFUsed to pipe from themale threaded portionof a pressure gauge,etc.Reducer Elbow10-KJLUsed to change thetubing entry ofOne-touch fittingsby 90° as well as todownsize the diameter.Different Dia.Union "Y"10-KJUUsed to branch a tubinginto smaller tubingsin the same direction.Straight Union10-KJHUsed to connect tubingsin the same direction.Male Branch Tee10-KJTUsed for branchingfrom a femalethreaded portionat 90° on both sides.Plug-in "Y"10-KJUUsed for branchingfrom a One-touchfitting into the samedirection.Air Line EquipmentDifferent Dia.Straight Union10-KJHUsed to connect tubingsof different sizes.Union Tee10-KJTUsed to branch a tubinginto 2 directions at 90°on both sides.Different Dia. Plug-in "Y"10-KJXUsed for branchingfrom a One-touchfitting into tubings ofsmaller diametersin the same direction.Male Elbow10-KJLUsed to pipe at a rightangle from a femalethreaded portion.Most common type.Different Dia. Union Tee10-KJTUsed to branch a tubinginto 2 smaller tubesat 90° on both sides.Male Branch "Y"10-KJUUsed for branchingfrom a femalethreaded portion intothe same direction.Elbow10-KJLUsed to connect tubingsat right angles.Male Run Tee10-KJYUsed for branching intothe same direction andat 90° either from maleor female threadedportion.Plug-in Reducer10-KJRUsed to change thediameter of One-touchfitting.525