Pneumatic Clean Series

Solenoid Valve 10-SY3000/5000324Manifold OptionIndividual SUP spacer assemblyIndividual EXH spacer assembly SUP block discBy installing a supply block discin the pressure supply passageof the manifold base, two or moredifferent pressures, high or low,can be supplied to one manifoldEXH block discBy installing an exhaust block discin the exhaust passage of themanifold bases, the passage can bedivided so that the exhaust from onevalve will not affect other valves.(Two block discs are required toblock both exhaust ports.)Series10-SY300010-SY5000Part No.SX3000-77-1ASX5000-77-1ASeries10-SY300010-SY5000Part No.SX3000-77-1ASX5000-77-1ASeries Ass'y part No. Port size10-SY3000 SY3000-38-2A M5 X 0.810-SY5000 SY5000-38-2A Rc1/8Note) Either in the lead wire directionor end plate direction. The SUPport can be used.Series Ass'y part No. Port size10-SY3000 SY3000-39-2A M5 X 0.810-SY5000 SY5000-39-2A Rc1/8Note) EXH. port can be directedeither toward the lead wire orend plate.Labels for block discLabels are applied to blocks with SUP and EXH block discs for externalconfirmation of blocked passages. (3 labels per package)VZ3000-123-1ASUP gate label EXH gate seal SUP, EXH gate labelBlanking plate assemblyCautionMounting screw tightening torqueM2: 0.15NmM3: 0.6NmM4: 1.4NmNote) When the block discs are ordered with manifolds using a manifoldspecification sheet, block disc labels are already attached where blockdiscs are installed at the time of shipment.Silencer with One-touch fittingCan be attached in one-touch to the R (Exhaust) port of the manifold.DirectionalControl ValveSeries10-SY300010-SY5000Ass'y part No.SX3000-75-1ASX5000-76-1ADIN rail dimensionsVZ1000 11 1 L dimensions∗For "", enter the No. in the DIN rail dimension table below.SeriesFor 10-SY3000 (ø8)For 10-SY5000 (ø10)ModelAN203-KM8AN200-KM10AN300-KM10Effective area14mm 226mm 230mm 2Aø16ø22ø25B2653.870Plug (White)To be inserted into unused cylinder ports and supply/exhaust ports.The minimum order quantity is 10 pieces. Order in multiples of 10.C5180.897No.L dimension098No. 11L dimension 235.5No.L dimension22373No. 33L dimension 510.5No.L dimension44648No. 55L dimension 785.5No.L dimension669231110.51224823385.53452345660.55679867935.5212313260.52439835535.54667357810.5689483135.51427325410.53654847685.55882369960.5414815285.52642337560.54869859835.5709735160.51629827435.53857349710.56084871985.5617317310.52844839585.55072361860.57185.51832329460.54059851735.562873819819335.53047341610.55274863885.59210.52034831485.54262353760.564898∗ Refer to dimension L1 on pages starting from 101 for lengths thatcorrespond to the number of manifold stations.1022321360.53249843635.55477365910.5DimensionsApplicable fitting sizesize ødModel A L D410-KQP-04 16 32 66 10-KQP-06 18 35 88 10-KQP-08 20.5 39 1010 10-KQP-10 22 43 12305