Pneumatic Clean Series

Compact Cylinder 10-CQS/11-CQS80With Auto Switch/Rod End Male Thread/10-CDQSB12 to 25, 11-CDQSB12 to 25ø122 X 2-ø6.5 recessed area 2 X 2-M4 X 0.7 effective depth 7M5 X 0.8(Relief port)17.5 55.5Auto switchLead wire minimum bending radius 102-M5 X 0.8(Piping port)ø3215.5250.5M5 X 0.8ø62-ø3.5 throughActuator9Rod End Nut5Flat washer10.510449.215.51432+Stroke2546 +Stroke8 4ø162 X 2-ø6.5 recessed area 2 X 2-M4 X 0.7 effective depth 7M5 X 0.8(Relief port)17.5 55.5Auto switchLead wire minimum bending radius 102-M5 X 0.8(Piping port)ø38M6 X 1.020290.5ø82-ø3.5 throughRod End Nut1062029Flat washer1215.510 432+Stroke47.5 +Stroke411.510 5ø202 X 2-ø9 recessed area 2 X 2-M6 X 1.0 effective depth 10Note2)M5 X 0.8(Relief port)19 5.55.5Auto switchLead wire minimum bending radius 102-M5 X 0.8(Piping port)M8 X 1.25ø4725.5361ø102-ø5.4 through12Rod End Nut825.5Flat washer1418.510739.5+Stroke7153658 +Stroke13 5ø252 X 2-ø9 recessed area 2 X 2-M6 X 1.0 effective depth 10ø5210284028401Flat washerM5 X 0.8(Relief port)M10 X 1.25ø1215215.517.5 10 722.5 42.5+Stroke65 +StrokeNote 1) Standard strokes available in 5mm increments. 2) Through-hole in case of 5mm stroke.5.57Auto switchLead wire minimum bending radius 102-M5 X 0.8(Piping port)2-ø5.4 throughRod End Nut19.617 661