Pneumatic Clean Series

SeriesHow to Order10-11-CQSXLow Speed Cylinderø12, ø16, ø20, ø25199Clean series10 Relief type11 Vacuum suction type10C(D)QSXB 2030 D A93BWith auto switch(Built-in magnet)Low speed cylinderMountingThrough-hole/Both ends tapped (Standard)12162025Bore size12mm16mm20mm25mmNumber of auto switchesNilSnType of auto switch21nNil Without auto switch (Built-in magnet)∗Refer to the table below for auto switch model numbers.Rod end threadNil Standard (Rod end female thread)M Rod end male threadBore size(mm)Cylinder stroke (mm)Standard stroke(mm)12, 16 5, 10, 15, 20, 25, 3020 5, 10, 15, 20, 25,25 30, 35, 40, 45, 50Manufacturing of intermediate strokeIntermediate strokes can be manufactured in 1mmincrements by attaching a spacer to a standardstroke cylinder. The total length of the cylinder inthis case is identical to that of a standard modelwith a larger stroke.Example) 10-CQSXB25-47D is a model with a3mm width spacer installed inside the standardstroke cylinder 10-CQSXB25-50D.ActionDDouble actingAuto Switch SpecificationsStyleReed switch2-wireSolid state systemswitch 3-wiresystemAuto switch part no.D-A93D-F9BD-F9N(Refer to EP97-2-C for detailed specifications and auto switches not in the following table.)Load voltage Load current range Indicator lightApplication24VDC, 100VAC 5 to 40mA, 5 to 20mA YesRelay, PLC24VDC (10 to 28VDC) 5 to 40mA Yes24VDC relay, PLC28VDC or less 40mA or less Yes24VDC relay, PLC180