Pneumatic Clean Series

Solenoid Valve 10-VQ1000/2000407VQ1000/Body Ported Type Flip Plug-in UnitHow to Order ManifoldsClean seriesSeries VQ1000Flip plug-in unitValve stationsThe number of maximum stations differs from kit to kit.(Refer to the table below.)A,B port sizeA: For ø6 One-touch fittingB: Rc(PT)1/8 thread10 - V V 5 Q 1 3 - 08 A F S1 - NKit designation/Electrical entry direction/Cable LengthRefer to the figure below.OptionNil — NoneD — DIN rail mount type Note 2)K — Special wiring specification (Except double wiring) Note 3)N — Name plateNote 1) When more than one option is specified, list them in alphabetical order(e.g. -DKN).Note 2) S kit is only available for DIN rail mounting so include an optionsymbol "D".Note 3) Indicate the wiring specification on a manifold specification sheet.Kit Designation/Electrical Entry Direction/Cable LengthF Kit (D-sub Connector Kit)P Kit (Flat Ribbon Cable Kit)Top entryTop entry25PNote 1)26PNote 1)Side entrySide entry26PNote 1)25PNote 1)Connector entryTop entry Side entryFKitU0U1U2U3FKitS0S1S2S3Without cableWith 1.5 m cableWith 3 m cableWith 5 m cableNote)Maximum12 stationsNote 1) Besides the above, F kits with different number of pins are available.Note 2) Using special wiring, semi-standard specifications with a larger maximum number ofstations are available.Connector entryTop entry Side entryPKitU0U1U2U3PKitS0S1S2S3Without cableWith 1.5 m cableWith 3 m cableWith 5 m cableNote)Maximum12 stationsNote 1) Besides the above, P kits with different number of pins are available.Note 2) Using special wiring, semi-standard specifications with a larger maximum number ofstations are available.388