Pneumatic Clean Series

Rotary Table/Rack Pinion Type 11-MSQ230Auto Switch Specifications(Refer to CAT.ES20-92 for detailed specifications and auto switches not in the following table.)StyleAuto switch part No.Load voltageLoad curent rangeIndicator lightApplicationReed switchSolid state 2-wire systemswitch 3-wire systemD-A90D-F9BD-F9NACAC24V DC or less, 48V ACDC or less, 100V DC or less,24VDC (10 to 28VDC)28VDC or less50mA,40mA,20mA5 to 40mA40mA or lessNoYesYesIC circuit, Relay, PLC24VDC relay, PLC24VDC relay, PLCAuto Switch Operating Range/Hysteresis/Most Sensitive PositionBARotary ActuatorOperating range with proper mounting position (Lm/2)Max. senser positionOperating range of auto switch body LmOperating angle θm : Converts the operating range (Lm) of the auto switch into the rotation angle.Actuation angle : Calculated by converting operating range (L m) of auto switch into rotation angle of the rod.SizeRotationReed switchangle A B Operating angle θm10 190° 17 36 90°20 190° 23 50 80°30 190° 27 56 65°50 190° 33 68 50°Actuation angle10°10°10°10°(mm)Solid state switchA B Operating angle θm Actuation angle21 40 90° 10°27 54 80° 10°31 60 65° 10°37 72 50° 10°CautionRefer to pages 7 to 16 of Front matter for safety precautions and common precautions with clean series. Refer topages 188 to 190 for common precautions with rotary actuators.211