Pneumatic Clean Series

Series 11-MSQRotary Table/Rack Pinion TypeSize 10,20,30,50229How to OrderClean series11-Vacuum suction typeA — High precisionB — BasicSize1020305011 - MSQ B 10 A - A90 SA — With adjustment boltR — With shock absorberType of auto switchReed switchA90Solid state switchF9NF9BNumber of auto switchesNil — 2S — 1n — nModelModel11-MSQ1011-MSQ2011-MSQ3011-MSQ50Size10203050LubricationNon-lubeAuto switch mountingAvailableWith cushionRubberShock absorberAvailable(Adjustment bolt)AvailableSpecificationsBore size 10 20 30 50FluidMax. operating With adjustment boltAir (Non-lube)1MPapressoure With shock absorber0.6MPa ∗Min. operatingpressoure MSQA100.1MPa0.2MPaAmbient and fluid temperatureWith adjustment bolt0 to 60°C (With no condensation)Rubber bumperCushion With shock absorberShock absorberAbsorber model RBA0805-X692 RBA1006-X692 RBA1411-X692Allowable With adjustment bolt 0.007J 0.025J 0.048J 0.081Jkinetic energy With shock absorber 0.039J 0.116J 0.294JAngle adjustable rangeMax. rotation angle0 to 190°190°Stable rotation With adjustment bolt0.2 to 1.0s/90°time regulationrangeWith shock absorber0.2 to 0.7s/90°Piston diameter ø15 ø18 ø21 ø25Port sizeM5 X 0.8 Rc1/8,M5 X 0.8∗Maximum operating pressure of actuator is limited to the maximum allowable thrust of absorber.Direction and Angle of RotationWhen the cylinder is pressurized from A port, the table rotates clockwise.To obtain the desired rotation angle, the rotation ends can be set within therange shown in the diagram by regulating the adjustment bolt.Models with shock absorber can also have an adjustable rotation range.Adjusting boltA(For adjustingcounter-clockwise end)Adjusting boltB(For adjustingclockwise end)AportPositioning pin holeClockwise rotation endAdjustable range 95°Rotation in theclockwise directionCounter-clockwise rotation endAdjustable range 95°Max. rotation angle190°Note) • The diagram indicates the rotation range of the positioning pin hole.• The pin hole position in the diagram indicates the end of acounterclockwise rotation when adjustment bolts A and B arescrewed in equally to adjust the rotation angle to 180°.5°22.5°210