Pneumatic Clean Series

Air Cylinder 10-CM2/11-CM246Specific Product PrecautionsBe sure to read before handling.Refer to pages 7 to 16 of Front matter for safety instructions and common precautions for clean series andpages 2 to 7 for common precautions for actuators.WarningqDo not rotate the cover.When installing a cylinder or screwing a pipe fitting into theport, the coupling portion of the cover could break if the coveris rotated.wDo not open the cushion valve of the type with aircushion to the position beyond the stopper.•Do not open the cushion valve larger than the snap ringholding the cushion valve (full open) or do not remove thesnap ring intentionally.•If the above items are not confirmed before compressed airis supplied, the cushion valve may pop out of the cover.•Use the hexagon wrench key shown below when adjustingthe cushion valve.PrecautionsCautionqBe careful to prevent the snap ring from popping out.When replacing the rod seal, take special precautions not toallow the snap ring to pop out.wDo not touch the cylinder during operation.If the cylinder is operating at a high frequency, be aware thecylinder tube surface could become very hot, leading todanger of burns.ActuatorBore size(mm)Cushion valveWidth across flats ofhexagon socket (mm)20, 25, 32, 40 1.5ToolJISB4648Hexagon wrench key1.5Snap ring27