Pneumatic Clean Series

Compact Cylinder 10-CQS/11-CQS79With Auto Switch/10-CDQSB12 to 25, 11-CDQSB12 to 25ø122 X 2-ø6.5 recessed area M3 X 0.5 effective depth 62 X 2-M4 X 0.7effective depth 7M5 X 0.8(Relief port)5.517.5 5Auto switchLead wire minimum bending radius 102-M5 X 0.8(Piping port)ø3215.5250.5ø62-ø3.5 throughø162 X 2-M4 X 0.7effective depth 7515.5252 X 2-ø6.5 recessed area M4 X 0.7 effective depth 8Flat washer3.5M5 X 0.8(Relief port)10 4 432+Stroke35.5+Stroke17.5 55.5Auto switchLead wire minimum bending radius 102-M5 X 0.8(Piping port)ø3820290.5ø82-ø3.5 through6Flat washer104 4203.532+Strokeø20292 X 2-ø9 recessed area M5 X 0.8 effective depth 72 X 2-M6 X 1.0effective depth 10Note)2ø47M5 X 0.8(Relief port)35.5+Stroke19 5.55.5Auto switchLead wire minimum bending radius 102-M5 X 0.8(Piping port)25.5361ø102-ø5.4 through825.5Flat washer4.5107 739.5+Stroke3644+Strokeø252 X 2-ø9 recessed area M6 X 1.0 effective depth 122 X 2-M6 X 1.0effective depth 10M5 X 0.8(Relief port)21 5.55.5Auto switchLead wire minimum bending radius 102-M5 X 0.8(Piping port)ø5228401ø122-ø5.4 through10Flat washer10 7 72840542.5+Stroke47.5+StrokeNote 1) Standard strokes available in 5mm increments. 2) Through-hole in case of 5mm stroke.60