12.07.2015 Views

Pneumatic Clean Series

Pneumatic Clean Series

Pneumatic Clean Series

SHOW MORE
SHOW LESS

Create successful ePaper yourself

Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.

Rotary Actuator 10-CRB1213Auto Switch Specifications (Refer to page 1.1-11 of Best <strong>Pneumatic</strong>s e for detailed specifications and auto switches not in the following table.)10152030StyleReed switchSolid state 2-wire systemAuto switch part No.D-90D-T991/T992switch 3-wire system D-S991/S992Reed switch D-R731/R732Solid state 2-wire system D-T791/T792switch 3-wire system D-S791/S792Load voltageAC24V DC or less24VDC28VDC or less100VAC24VDC28VDC or lessLoad current range50mA5 to 150mA150mA or less5 to 20mA5 to 150mA150mA or lessIndicator light—YesYesYesYesYesApplicationRelay, PLC, IC circuitRelay, PLCRelay, PLC, IC circuitRelay, PLCClassification of Auto Switch Styles/Right-hand Style and Left-hand StyleRight-hand styleLeft-hand styleD-1D-2D-991D-992How to Move The Auto Switch Detection PositionTo set the detection position, slightly loosen the round headPhillips screw, move the switch to the desired position and secureit by tightening the set screw. Do not overtighten the screwbecause once its threads are stripped, the switch cannot besecured. The proper tightening torque is approximately 0.5 Nm.Operating Range and Hysteresis Range of Auto SwitchModelOperating range Hysteresis range10-CDRB1BW10/15 110°10°10-CDRB1BW20/30 90°10°Auto switchCross-recessedhead screw10-CDRB1W10/1510-CDRB1W20/30194

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!