Pneumatic Clean Series

695Series 10-AR RegulatorHow to OrderClean seriesBody size20 25 30 40 50 60Thread typeNil RcN NPTF G10 AR 30 F 03 BG 1NRegulatorSymbol010203040610Portsize1/81/43/81/23/4120————25————Port sizeBody size30————40——50————60—————Optional specificationsNote 1)Accessories Symbol DescriptionApplicablemodelSymbol DescriptionApplicablemodelNil——3)Nil ——Note1 0.02 to 0.2 MPa setting 10-AR20 to 60B With bracket 10-AR20 to 60 N Non-relieving10-AR20 to 60Note 2) With roundR Flow direction: Right to left 10-AR20 to 60pressure gaugeGUpward handle(without limit 10-AR20 to 60 Y10-AR20 to 60indicator)Note 4) Name plate and pressureZ gauge in imperial 10-AR20 to 60With set nutunits (PSI, °F)H10-AR20 to 40(for panel mount)Note 1) Optional parts are notassembled and are suppliedloose at the time of shipment.Note 2) Pressure gauge mountingscrew is 1/8: 10-AR20 to 30,and 1/4: 10-AR40 to 60.Pressure gauge is G49 type.When more than one specification is required,indicate in ascending alphanumeric order.Note 3) The only difference from the standardspecifications is the adjusting spring forthe regulator.It does not restrict the setting of 0.2 MPa or more.Note 4) For NPT thread type.This product is for overseas use only accordingto the new Measurement Law. (The SI unit typeis provided for use in Japan.)Accessory/Optional specification combinationsAccessory/Optional specificationsAccessoriesOptionalspecificationsWith bracketRound pressure gaugeWith set nut0.02 to 0.2 MPa settingNon-relieving typeFlow direction: Right to leftUpward handleName plate and pressure gauge inimperial units (PSI, °F)CombinationSymbolBGH–1–N–R–Y–Z: Combination available : Combination not available: Varies depending on the model : Available only with NPT threadAccessory Optional specification Applicable regulatorB G H 1 N R Y Z 10-AR20 to 40 10-AR50 to 60Standard specificationsModel10-AR20 10-AR25 10-AR30 10-AR40 10-AR40-06 10-AR50Port sizesFluidProof pressureMaximum operating pressureSet pressure range1/8, 1/4 1/4, 3/8 1/4, 3/8 1/4, 3/8, 1/2Air1.5 MPa1.0 MPa0.05 to 0.85 MPa3/4 3/4, 1Pressure gauge port size1/81/81/81/41/41/4Relief pressureAmbient and fluid temperatureConstructionSet pressure + 0.05 MPa [at relief flow rate of 0.1l/min (ANR)]–5 to 60°C (with no freezing)Relieving type10-AR6011/4Accessory part no.AccessoryApplicable model 10-AR20 10-AR25 10-AR30 10-AR40 10-AR40-06 10-AR50 10-AR60Bracket assembly Note 5)AR20P-270AS AR25P-270AS AR30P-270AS AR40P-270AS AR40P-270AS AR50P-270AS Note 6) AR50P-270AS1.0 MPa G49-10-01 G49-10-01 G49-10-01 G49-10-02 G49-10-02 G49-10-02 G49-10-02Pressure gauge Note 7)0.2 MPa G49-2-01 G49-2-01 G49-2-01 G49-2-02 G49-2-02 G49-2-02 G49-2-02Note 5) Assembly includes a bracket and set nuts.Note 6) Assembly includes a bracket and 2 mounting screws.Note 7) in part numbers for a pressure gauge indicates a type of connection thread. The symbol for thread type is Nil: R, N: NPT.7Note 6)