Pneumatic Clean Series

Series 11-MHR3How to OrderRotary Actuated Air Gripper3 Finger/ø10,ø15245Clean series11 — Vacuum suction typeBuilt-in magnetNil — NoD — With magnet (For auto switch)Number of fingers3 — 3 fingersNominal size101511 - M D H R 3 - 10 R - F9B L SR: Body sidePortPort locationE: Axial sidePort∗ Only the R type is available with typeswithout auto switch.Auto switchSolid state switchF9BF9NF8BF8NLead wire lengthNil — 0.5m (standard)L — 3mNumber of auto switchesNil — 2S — 1ModelVacuumsuction typeSpecifications226Model11-MHR3-1011-MHR3-15Nominal sizeItemOperating pressureAmbient and fluid temperatureRepeat abilityMax. operating frequencyNominal Port∗Effective holding force (N) at 0.5 (MPa) Opening stroke (Diameter)Lubrication Actionsize sizeExternal holding force Internal holding force Finger close width (mm) Finger open width (mm) Stroke (mm)10Not Double 76.516 22 6M3 X 0.5required acting15131219 27 8100.2 to 0.6MPa∗ Refer to data on page 2.3-19 of Best Pneumatics e for the holding force at each holding point.The effective holding force is that in the middle of the opening and closing stroke.0 to 60°C±0.01mm180 c.p.m.150.15 to 0.6MPa