Pneumatic Clean Series

Digital Pressure Switch 10-PSE639Pressure Sensor for General FluidsHow to OrderClean seriesPressure specifications0—High pressure (0 to 1MPa)10 - P S E 5 2 0 - 01Piping specifications01 —R1/8,M5X0.802 —R1/4,M5X0.8T01—NPTF1/8,M5X0.8T02—NPTF1/4,M5X0.8Sensor Specifications/For General FluidsModelOperating pressure rangeMax. operating pressureFluidOutput specificationsPower supply voltageCurrent consumptionOperating temperature rangeTemperature characteristics 25±10°C(25°C standard)-10 to 70°CRepeatabilityWithstand voltageInsulation resistanceVibration resistanceShock resistanceEnclosureMaterialLead wireport sizeWeightCasePressure sensor area10-PSE520-0110-PSE520-02 10-PSE520-T010 to 1MPa2MPaFluids that will not corrode SUS304, SUS63010-PSE520-T02Analog output (1 to 5V Load impedance;10kΩ or more)12 to 24VDC (Ripple10% or less)15mA or less–10 to 70°C (With no freezing or condensation)±1%F.S. or less±3%F.S. or less±0.3%F.S. or lessBetween GND terminal and case 250VAC 1 minuteBetween external terminals and case 100MΩ (Measured with a 500 VDC megameter)1.5 mm amplitude in 10 to 55 Hz for 2 h in X, Y, Z direction each294m/s 2 (11ms or less) in X, Y, Z direction, 3 times eachIP65Case:SUS304, Fitting: SUS304Diaphragm: SUS630Special elastic polyvinyl chloride ø6 0.34 mm2 3 wire (Red, Black, White) 3000 mmR1/8, M5 X 0.8 R1/4, M5 X 0.8 NPTF1/8, M5 X 0.8 NPTF1/4, M5 X 0.8Approx.220gCautionThis product is Series PSE520 blown with air and double packed in a Class 100 clean room.Be sure to read before handling. Refer to pages 7 to 16 of Front matter for safety instructions and commonprecautions for clean series and pages 616 and 617 for common precautions for pressure switches.620