Pneumatic Clean Series

Dual Rod Cylinder 11-CXSL/12-CXSL111Basic/11-CXSL15, 12-CXSL15SZZ12018M6 X 1.0 X 5 L(Hexagon sockethead cap screw)10 95 30ZSS2-ø4.3 through2-ø8 depth of counter bore 4.46.3558561254892-M4 X 0.7thread depth 6ø85M4 X 0.7 X 14.5 L and M4 X 0.7(Hexagon bolt) (Hexagon nut)2-M5 X 0.8(Through)M5 X 0.8 X 10 L(Hexagon socket head cap bolt)2-M5 X 0.8 thread depth 4.5 Note)(Same on the opposite side)45 ±0.2 45 ±0.24-M4 X 0.7 thread depth 5(same on the opposite side)4-M5 X 0.8 thread depth 4.5(Piping port)(Same on the opposite side)1045 ±0.230(Z)104682-M4 X 0.7 thread depth 65(30) (Z)2-M5 X 0.8thread depth 8Note) Vacuum ports are used in case of 11-. Be sure to vacuum air from 2ports on both sides.Exhaust ports are used in case of 12-. Be sure to exhaust air from aport on one side. Unlike vacuum suction, exhaust does not require 2ports so the piston rod B side port is plugged with 12-.Model11-12-CXSL15-1011-12-CXSL15-2011-12-CXSL15-3011-12-CXSL15-4011-12-CXSL15-50S SS ZZ Z10 77.5 96.5 2520 87.5 106.5 2530 97.5 116.5 3540 107.5 126.5 3550 117.5 136.5 45(mm)92