Pneumatic Clean Series

Micro Mist Separator Regulator 10-AWD523Specific Product PrecautionsBe sure to read before handling.Refer to pages 7 to 16 of Front matter for safety instructions and common precautions for clean series andpages 472 and 473 for common precautions for air line equipment.WarningSelectionq The residual secondary pressure cannot be released byreleasing the primary pressure.Consult SMC to release the residual pressure.CautionAir Supplyq To prevent premature clogging, install a mist separator(Series AFM), which serves as a prefilter, on the primary sideof the micro mist separator regulator.Mounting and AdjustmentWarningq The adjustment handle must be operated manually. Use of atool to turn the handle could lead to damage.Cautionq Release the lock to adjust the pressure. After the adjustment,engage the lock.Failure to observe this procedure could damage the handleor cause the secondary pressure to fluctuate.• To unlock the regulator, pull the adjustment handle.(An orange colored line is provided at the bottom of theadjustment handle for visual checking.)Push the pressure regulation handle to engage the lock. Ifit does not lock easily, turn the handle slightly clockwise orcounterclockwise until the orange colored line goes out ofsight.WarningMaintenanceq Replace the element when the pressure drop reaches 0.1MPa or when two years have passed since the operationstart, whichever is earlier. Failure to observe this precautioncould cause damage to the filter element.504