Pneumatic Clean Series

One-touch Fittings 10-KQ552ModelHex. Socket HeadMale ConnectorUniversal Male Elbow10-KQSThe hexagon socket of the bodyis used to tighten the maleconnector with a hexagonwrench in a confinedspace.10-KQVThe hexagon socket ofthe body is used totighten the male elbowwith a box wrench ina confined space.45° Male Elbow10-KQK Used for piping at 45°from a female threadedportion. An intermediatemodel between a maleconnector and male elbow.Extended Male Elbow10-KQWUsed basically in the sameway as a standard maleelbow but also to extendthe elbow over astandard one for ease ofconnection and disconnectionof tubing.Bulkhead UnionBulkhead Female Union10-KQEUsed for relay connection fromone tubing to another acrossa panel.10-KQEUsed to connect a malethreaded portion anda tube across a panel.NippleDifferent Dia. Nipple10-KQNUsed to connectOne-touch fittings.10-KQNUsed to connectOne-touch fittings ofdifferent diameters.Male Connector10-KQHFemale Connector10-KQFUsed to pipe in thesame direction froma female threadedportion.Most common type.Used to pipe from themale threaded portionof a pressure gauge,etc.Male Elbow10-KQLElbow10-KQLUsed† to pipe at aright angle from afemale threadedportion.Most common type.Used to connecttubings at right angles.Male Branch Tee10-KQTUnion Tee10-KQTUsed for branchingfrom a femalethreaded portion at90° on both sides.Used to branch atubing into 2 directionsat 90° on both sides.Air Line EquipmentStraight Union10-KQHUsed to connecttubings in the samedirection.Plug-in Elbow10-KQLUsed to change thetubing entry ofOne-touch fittingsby 90°.Different Dia. Union Tee10-KQTUsed to branch atubing into 2 smallertubes at 90° on bothsides.Different Dia.Straight Union10-KQHUsed to connecttubings of differentsizes.Reducer Elbow10-KQLUsed to change thetubing entry ofOne-touch fittingsby 90° as well as todownsize thediameter.Different Dia. Union Tee10-KQTUsed to branch atubing into one in thesame direction andanother smaller oneat 90°.Cross10-KQTW Used to connect 4tubings in 4 differentdirections.Different Dia. Cross10-KQTXUsed to connect 4tubes at right angles,with 2 smaller tubingson both sides.Different Dia. Cross10-KQTYUsed to branch atubing into 3 smallertubes at right angles.533