Pneumatic Clean Series

Micro Mist Separator 10-AFD500Dimensions10-AFD3000-02 to 03-J 10-AFD4000-02 to 04-J445335534-M4 X 0.7 X 5Bracket mounting thread4-M5 X 0.8Bracket mounting thread2-Rc1/4 to 3/85673INOUT14IN135607047702-Rc1/4 to 1/2OUT18171Rc1/4Rc1/410-AFD4000-06-J6070Specific Product PrecautionsAir Line Equipment47754-M5 X 0.8 X 8Bracket mounting thread2-Rc3/473Be sure to read before handling.Refer to pages 7 to 16 of Front matter for safety instructionsand common precautions for clean series and pages 472 and473 for common precautions for air line equipment.INOUT20175CautionAir Supplyq To prevent premature clogging, install a mist separator(Series AFM), which serves as a prefilter, on the primaryside of the micro mist separator regulator.w A dryer should be installed on the secondary side.Installation of a dryer on the primary side may cause the filterelement to be clogged prematurely.Rc1/4WarningMaintenanceqReplace the element when the pressure drop reaches0.1MPa or when two years have passed since the operationstart, whichever is earlier.481