Pneumatic Clean Series

Rotary Actuator 10-CRB1212SpecificationsSingle VaneNote1)Note2)Model 10-CRB1BW10-S 10-CRB1BW15-S 10-CRB1BW20-S 10-CRB1BW30-SRotation angleProof pressure MPaMax. operating pressure MPaMin. operating pressure MPaAmbient and fluid temperature °CSpeed adjustable range s/90°Allowable kinetic energy JShaft loadNAllowable radial loadAllowable thrust loadBearingPort positionBody sideSizeAxial directionShaft typeMountingAuto switch90°, 180°, 270°1.05 1.50.7 1.00.2 0.155 to 600.03 to 0.3 0.04 to 0.30.00015 0.001 0.003 0.008714.7 14.7 24.5 29.49.8 9.8 19.6 24.5Ball bearingOn the body side or in the axial directionM3 X 0.5 M3 X 0.5 M5 X 0.8 M5 X 0.8M3 X 0.5 M3 X 0.5 M5 X 0.8 M5 X 0.8Double shaft (With one flat chamfer to each shaft)Basic, FlangeMountable (Port: Body side)Note 1) Be sure to operate within the adjustable speed range. A speed exceeding the upper limit (0.3s/90°) could cause a stick phenomenon or malfunction.Note 2) In the chart, the values represent the energy factor when the rubber bumper is used (at the end of rotation).Rotary ActuatorDouble VaneNote1)Note2)Model 10-CRB1BW15-D 10-CRB1BW20-D 10-CRB1BW30-DRotation angleProof pressure MPaMax. operating pressure MPaMin. operating pressure MPaAmbient and fluid temperature °CSpeed adjustable range s/90°Allowable kinetic energy JShaft loadNAllowable radial loadAllowable thrust loadBearingPort positionSize: Body side, Axial directionShaft typeMountingAuto switch90°, 100°1.05 1.50.7 1.00.155 to 600.03 to 0.3 0.04 to 0.30.001 0.003 0.008714.7 24.5 29.49.8 19.6 24.5Ball bearingOn the body side or in the axial directionM3 X 0.5 M5 X 0.8Double shaft (With one flat chamfer to each shaft)Basic, FlangeMountable (Port: Body side)Note 1) Be sure to operate within the adjustable speed range. A speed exceeding the upper limit (0.3s/90°) could cause a stick phenomenon or malfunction.Note 2) In the chart, the values represent the energy factor when the rubber bumper is used (at the end of rotation).CautionRefer to pages 7 to 16 of Front matter for safety precautions and common precautions for clean series. Refer topages 188 to 190 for common precautions for rotary actuators.193