Pneumatic Clean Series

Series10-ASSpeed ControllerCylinder Direct Mount Type Metal Elbow TypeAS1200, 2200, 3200, 4200485How to OrderClean seriesBody size1 — M3,M5 standard2 — 1/8,1/4 standard3 — 3/8 standard4 — 1/2 standardElbow10 - AS 2 2 0 0 - 02 -Controlled method0 — Meter-out1 — Meter-inPort sizeM3 — M3 X 0.5M5 — M5 X 0.801 — R1/802 — R1/403 — R3/804 — R1/2OptionS — With sealantK — Hexagon lock nutN — Nickel plated typeSpecificationsModelPort sizeApplicable cylinder bore size (mm)Proof pressureMax. operating pressureMin. operating pressureAmbient and fluid temperatureNumber of needle rotationsOptionWeight gControlled flow Flow rate l/min (ANR)(Free flow) Effective area mm 246610-AS1200-M3M3 X 0.510-AS120-M5M5 X 0.86, 10, 15, 20, 2510-AS220-01 10-AS220-02 10-AS320-03 10-AS420-04R1/8 R1/4 R3/8 R1/232, 40, 50, 63 80, 1002.5, 4, 620, 25, 32, 401.05MPa1.5MPa0.7MPa1MPa0.1MPa0.1MPa–5 to 60°C (No freezing)10 rotations 8 rotations10 rotationsHexagon lock nutWith sealant, Hexagon lock nut, Nickel plated3 1029 64 106 181200.3Note 1) Supply pressure: 0.5MPa, Temperature: 20°C.Note 2) A meter-in type is not available with AS1200-M3.Note 3) Visual distinction between meter-out and meter-in typesThe meter-out and meter-in types can be visually determined by the lock nut.The lock nut of the meter-out type is electroless nickel plated while that of the meter-in type is black zinc chromate plated.Note 4) The standard AS120 and AS220 types are nickel plated.Caution1051.6Refer to pages 7 to 16 of Front matter for safety instructions and common precautions for clean series and pages432 and 433 for common precautions for flow control equipment.2303.5460792014170026