Pneumatic Clean Series

Compact Cylinder with Guide 12-MGPL/13-MGPL120Specific Product PrecautionsBe sure to read before handling.Refer to pages 7 to 16 of Front matter for safety instructions and common precautions for clean series andpages 2 to 7 for common precautions for actuators.WarningqDo not put your hand or fingers between the cylinder andthe body.When air pressure is applied, take extra precautions to avoidhaving your hand or fingers caught between the cylinderbody and the plate.MountingCautionqDo not scratch or gouge the sliding parts of the pistonrod and guide rods.Damage to seals can cause air leakage or malfunction.wBottom of cylinderThe guide rods protrude from the bottom of the cylinder at theend of the retracting stroke and therefore, in cases where thecylinder is bottom mounted, it is necessary to provide escape(run-off) holes on the mounting surface for the guide rods,besides holes for the hexagon socket head screws used formounting.ActuatorC ±0.2B ±0.22d or more(d=Thread O.D.)øDEscape hole diameterA ±0.2Bore size (mm)A(mm)B(mm)C(mm)øD(mm)Hexagon socketmounting bolt121620253240506350567282981061301421822243034404658414654647886110124810121518182222M4 X 0.7M5 X 0.8M5 X 0.8M6 X 1.0M8 X 1.25M8 X 1.25M10 X 1.5M10 X 1.5101