Pneumatic Clean Series

Series 10-AFMMist Separator691How to OrderThread typeNil RcN Note 1) NPTFNote 2) GNote 1) Drain guide is NPT1/8 (applicable to10-AFM20), andNPT1/4 (applicableto 10-AFM30, 40).Note 2) Drain guide is G1/8(10-AFM20), andG1/4 (applicable to10-AFM30, 40).10 AFM 30 F 03 B JClean seriesMist separatorBody size20 30 40AccessoriesSymbol0102030406Portsize1/81/43/81/23/420———Port sizeBody size30———40—∗ "J" must always be selected.Optional specificationsAccessoriesSymbol DescriptionApplicablemodelSymbol DescriptionApplicable 2 Metal bowl10-AFM20 to 40modelNylon bowlNil610-AFM20 to 40——B Note 3) 8 Metal bowl with level gauge 10-AFM30, 40With bracket 10-AFM20 to 40C With bowl guard 10-AFM20Note 3) Bracket is not assembledNote 4)and is supplied loose at theDrain guide 1/8 10-AFM20time of shipment.JDrain guide 1/4 10-AFM30, 40R Flow direction: Right to left 10-AFM20 to 40Note 5) Name plate and cautionZ plate for bowl in imperial 10-AFM20 to 40units (PSI, °F)When more than one specification is required, indicate in ascending alphanumeric order.Note 4) Without a valve function.Note 5) For NPT thread type.This product is for overseas use only according to the new Measurement Law.(The SI unit type is provided for use in Japan.)Accessory/Optional specification combinationsAccessory/Optional specificationsWith bracketMetal bowlNylon bowlMetal bowl with level gaugeWith bowl guardDrain guideOptional specificationsCombinationFlow direction: Right to leftName plate and caution plate for bowl inimperial units (PSI, °F)SymbolB–2–6–8–C–J–R–ZAccessory: Combination available : Combination not available: Varies depending on the model : Available only with NPT threadOptional specificationApplicable mist separatorB 2 6 8 C J R Z 10-AFM20 10-AFM30, 40Standard specificationsModelPort sizesFluidProof pressureMaximum operating pressureMinimum operating pressureAmbient and fluid temperatureFiltration accuracyOutlet side oil mist concentrationRated flow {l/min (ANR)} Note 7)Drain capacity (cm 3 )Drain guide piping portNote 6) When the compressor oil mist discharge concentration is 30 mgf/m 3 (ANR).Note 7) When the inlet pressure is 0.7 MPa. Flow rate varies depending on the inlet pressure.10-AFM2010-AFM3010-AFM4010-AFM40-061/8, 1/4 1/4, 3/8 1/4, 3/8, 1/2 3/4Air1.5 MPa1.0 MPa0.05 MPa–5 to 60°C (with no freezing)0.3 µm (95% filtered particle size)Maximum 1.0 mg/m 3 (ANR) Note 6) (approx. 0.8 ppm)2004501100110082545451/81/41/41/4Accessory part no.AccessoryApplicable modelBracket assembly Note 8)Note 8) Assembly includes a bracket and 2 mounting screws.310-AFM20AF20P-050AS10-AFM30AF30P-050AS10-AFM40AF40P-050AS10-AFM40-06AF40P-070AS