Pneumatic Clean Series

Guide Table 10-MGF124Specific Product PrecautionsBe sure to read before handling.Refer to pages 7 to 16 of Front matter for safety instructions and common precautions for clean series andpages 2 to 7 for common precautions for actuators.CautionSelectionqOperate the load within the operating limits.Select a load according to the allowable load in the horizontaldirection, allowable rotational torque and allowable eccentricload. If the operating limits are exceeded, an excessiveeccentric load applied to the tubing guide may cause wearingof the guide, larger rotation or damage to the fixing bolts, allhaving adverse effects on the product's life.wDo not scratch or gouge the mounting surface of theplate or end plate.It can decrease evenness of the mounting surface, resultingin larger guide rotation and more sliding resistance.eKeep away your hand and fingers from the cylinderduring operation.They may be caught between the body and the plate. Install acover when it is necessary to approach the cylinder duringoperation.CautionMountingqWhen mounting the cylinder, use screws of appropriatelengths and tighten with proper force not exceeding themaximum tightening torque.Top mountingModel BoltMaximum tightening torqueNml (mm)MGF40 M6 X 1107.5MGF63 M8 X 1.2525 9MGF100 M10 X 1.551 9Bottom mountingl lActuatorrKeep away objects which can be influenced by magnets.The cylinder has magnets built in the body. Please keepaway magnetic disks, cards or tapes. Otherwise the data canbe erased.tIn case of operation involving vertical movement with aheavy load, some measures may be necessary to preventlurching at the start of downward movement.If the operation involves vertical movement with a heavy load,applying the same pressure in both upward and downwardmovement may allow the starting speed of downwardmovement exceed the control speed of the speed controller.To avoid this, use a dual pressure control circuit in thepneumatic circuit.Model BoltMaximum tightening torqueNml (mm)MGF40 M8 X 1.25187.5MGF63 M10 X 1.536 9MGF100 M12 X 1.7565 9105