Pneumatic Clean Series

Compact Cylinder 10-CQS/11-CQS78Standard/Rod End Male Thread/10-CQSB12 to 25, 11-CQSB12 to 25ø122 X 2-ø6.5 recessed area 2 X 2-M4 X 0.7 effective depth 7Note2)M5 X 0.8(Relief port)17.55.552-M5 X 0.8(Piping port)ø3215.5250.5M5 X 0.8ø62-ø3.5 throughRod end nutActuator515.525Flat washer910.5 10 4 414 27+Stroke41+Stroke9.28 4ø162 X 2-ø6.5 recessed area 2 X 2-M4 X 0.7 effective depth 7Note2)M5 X 0.8(Relief port)5.517.552-M5 X 0.8(Piping port)ø38M6 X 1.020290.5ø82-ø3.5 throughRod end nut106Flat washer12 10 4 411.52015.527+Stroke2942.5+Stroke10 5ø202 X 2-ø9 recessed area 2 X 2-M6 X 1.0 effective depth 10Note3)M5 X 0.8(Relief port)195.55.52-M5 X 0.8(Piping port)ø4725.5361M8 X 1.25ø102-ø5.4 throughRod end nut12825.5Flat washer14 10 7 718.5 29.5+Stroke153648+Stroke13 5ø252 X 2-ø9 recessed area 2 X 2-M6 X 1.0 effective depth 10Note4)M5 X 0.8(Relief port)215.55.52-M5 X 0.8(Piping port)ø5228401M10 X 1.25ø122-ø5.4 throughRod end nut151028Flat washer17.5 10 7 722.5 32.5+Stroke19.64055+Stroke17 6Note 1) Standard strokes available in 5mm increments. 2) Through-hole in case of 5mm stroke.3) Through hole in case of 5 to 15mm stroke. 4) Through-hole in case of 5 or 10mm stroke.59