Pneumatic Clean Series

Solenoid Valve 10-VQ1000/2000415VQ1000/Body Ported TypeFlip Plug Lead UnitHow to Order ManifoldsClean seriesVQ1000Flip plug lead unitValve stationsThe number of maximum stations differs from kit to kit.(Refer to the table below.)10 - V V 5 Q 1 4 - 08 A C - D NP,R port sizeA: For ø6 One-touch fittingB: Rc1/8 threadKit designation/Electrical entry direction/Cable LengthRefer to the figure below.OptionNil — NoneD — DIN rail mount type Note 2)K — Special wiring specification (Except double wiring) Note 3)N — Name plateNote 1) When more than one option is specified, list them in alphabetical order(e.g. -BDN).Note 2) Specify "-D" for F, P and S kits, which come with a DIN rail.Note 3) Indicate the wiring specification on a manifold specification sheet(Except C kit).Kit Designation/Electrical Entry Direction/Cable LengthF Kit (D-sub Connector Kit)P Kit (Flat Ribbon Cable Kit)Side entrySide entryNote 1)26PNote 1)25PTop entryTop entryNote 1)25PNote 1)26PConnector entryTop entry Side entryFKitU0U1U2U3FKitS0S1S2S3Without cableWith 1.5 m cableWith 3 m cableWith 5 m cableNote 2)Maximum8 stationsNote 1) Besides the above, F kits with different number of pins are available.Note 2) Using special wiring, semi-standard specifications with a larger maximum number ofstations are available.Connector entryTop entry Side entryPKitU0U1U2U3PKitS0S1S2S3Without cableWith 1.5 m cableWith 3 m cableWith 5 m cableNote 2)Maximum8 stationsNote 1) Besides the above, P kits with different number of pins are available.Note 2) Using special wiring, semi-standard specifications with a larger maximum number ofstations are available.396