Pneumatic Clean Series

Series10-AWMHow to OrderMist Separator Regulator517Clean seriesBody size30—3/840—1/2Port size02—Rc1/403—Rc3/804—Rc1/210 - AWM 30 00 - 02 BG9 - 1 J N RAccessory (Option)Nil — NoB — BracketG9 — Pressure gaugeSet pressureNil — 0.85MPa settings(Standard specifications)1 — 0.2MPa settingsSame as the 0.85MPa setting except forthe adjustment spring.The upper limit of the secondary pressure maybe larger by 0.2 MPa or more.With drain guide(Without valve mechanism)ModelNon-relief type(Standard specifications)OptionsNil — Flow direction: Left Right (Standard)R — Flow direction: Right LeftSpecifications498MODEL10-AWM3000-02-JN10-AWM3000-03-JN10-AWM4000-02-JN10-AWM4000-03-JN10-AWM4000-04-JNFluidProof pressureMax. operating pressureGauge port sizeAmbient and fluid temperatureNominal filtration ratingOil mist density on secondary sideElement lifeConstructionPort sizeRc1/43/81/43/81/2Note 1)Flow ratel / min(ANR)330820Note 1) At compressor exhaust density of 30mgf/Nm 3Note 2) Small amount of grease is used for O-ring of the case and other O-rings.Drain storagecm 32345Set pressure rangeMPa0.05 to 0.85Note 2)0.05 to 0.2ApplicationAir1.5MPa1.0MPaRc1/4–5 to 60°C (No freezing)0.3µm (95% scavenging particle diameter)Max.1.0mgf/Nm 3 (≅0.8ppm) Note 1) Note 2)2 yearsNon-relief type• With drain guideRc1/4(Without valve mechanism)• Fitting attached tobonnet breathing hole(Applicable tubing O.D.ø6)Note 1) Secondary side pressure: In case of 0.5 MPa. (The rated air flow rate varies with the set pressure.) Be careful if the flow exceeds the rated flow rate+C149, oil will flow out to the secondary side.Note 2) Optional specificationAccessory (Option)/Part NumberDescriptionAccessoryPressuregaugeBracketModel1.0MPa0.2MPaFor 10-AWM3000B320G49-10-02G49-4-02Note) The pressure gauge for 0.2MPa settings is G49-4-02 for 0.4MPa.Use the factory mounted bracket and pressure gauge.Part NumberFor 10-AWM4000B420G49-10-02G49-4-02