Pneumatic Clean Series

Series TPSClean TubingSoft Polyolefin Tubing604How to OrderTPS0604B 20Tubing designationColor IndicationSymbol ColorW WhiteB BlackR RedBU BlueY YellowG GreenLength per rollSymbol Length20 20m bundle100 100m bundleBurst Pressure Characteristics CurveBurst pressure MPa54321 Max. operating pressure0–20 0 20 40 60 80Operating temperature °CCautionBurst pressureSeries TableModelO.D. mmI.D. mmWhite (W)Black (B)Red (R)Blue (BU)Yellow (Y)Green (G)SpecificationsTPS042542.5TPS060464TPS080585—20m bundle —100m bundleTPS1065106.5TPS1208128FluidMax. operatingpressure (20°C)Air, Nitrogen, Water (Pure water) Note 1)0.7MPa Note 2)Min. bending radius mm 10 20 25 30 40Burst pressureOperating temperatureMaterialRefer to the burst pressure characteristics curve–20 to 80°C, In case of water 5 to 80°CPolyolefine resinNote 1) Consult SMC regarding other fluids.Note 2) The maximum operating pressure is a value at 20°C. Refer to the burst pressure characteristicscurve for other temperatures. Abnormal temperature rises due to adiabatic expansion maycause tubing to burst.Note 3) The minimum bending radius is a bending radius at which the outside diameter's rate of changeis kept not larger than 10 % at 20°C. At higher temperatures, the outside diameter's rate ofchange may exceed 10% even at a value larger than the minimum bending radius.Series TPH is a line of tubing specially designed for clean blowing and washing lines. Consult SMC for use in other types of applications.Materials: The durability of polyolefine resin with respect to mineral oils is inferior, which makes it unsuitable for piping in general pneumaticequipment.Refer to pages 7 to 16 of Front matter for safety instructions and common precautions for clean series and pages 512 and 513 for commonprecautions for fittings.Air Line Equipment585