Pneumatic Clean Series

Solenoid Valve 10-VQ100441Manifold Specifications/Plug-in Unit Manifold with Multi-connectorHow to Order ManifoldsClean series10 - VV3Q 1 1 - 08 C U 1 - DSeries VQ100Manifold base modelPlug-in unitStations02 — 2 stations……18 —18 stationsElectrical entryMulti-connector typeElectrical entry directionU — Top entryS — Side entryApplicable solenoid valve (Plug-in type)10-VQ110-F• Consult SMC when the latching type is to be mounted.• U type (Large flow) can be mounted.Cable length0 — Without cable1 — With 1.5 m cable2 — With 3 m cable3 — With 5 m cableOptionNil — NoneD — DIN rail mounted (With DIN rail)Note)DO — DIN rail mounted (Without DIN rail)Note) The DIN rail should be ordered separately.How to Order ValvesClean series10 - VQ1 1 0 Y - 5 FSeries VQCompact 3 port valveActuation1 — Normally closed (N.C.)2 — Normally open (N.O.)FunctionY Note) —Low wattage type (0.5W)∗Nil — 1 Watt type∗U — Large flow type∗OptionThe low wattage type (0.5 W) is standardized.Note) Except large flow capacity specification.Rated coil voltage5 — 24VDC6 — 12VDC1 — 100VACElectrical entryF — Plug-inWith light/surge suppresser(For plug-in manifold only)Manual overrideNil — Non-locking push type (tool required)∗B — Locking type (tool required)∗Option422