Pneumatic Clean Series

Series10-AFDMicro-Mist Separator693How to OrderClean seriesNote 1) Drain guide is NPT1/8(applicable to 10-AFD20),and NPT1/4 (applicableto 10-AFD30, 40).Note 2) Drain guide is G1/8(applicable to 10-AFD20),and G1/4 (applicable to10-AFD30, 40).10 AFD 30 F 03 B JMicro-mist separatorBody size20 30 40Thread typeNil RcN Note 1) NPTF Note 2) GPort sizeAccessoriesAccessory/Optional specification combinationsAccessory/Optional specificationsWith bracketMetal bowlNylon bowlMetal bowl with level gaugeWith bowl guardDrain guideOptional specificationsAccessoriesSymbol0102030406Portsize1/81/43/81/23/420———Body size30———CombinationFlow direction: Right to leftName plate and caution plate for bowl inimperial units (PSI, °F)40—Symbol DescriptionApplicablemodelNil ——B Note 3) With bracket 10-AFD20 to 40Note 3) Bracket is not assembledand is supplied loose atthe time of shipment.B–2–6–8–C–J–R–Z∗ "J" must always be selected.Optional specificationsSymbol DescriptionApplicablemodel2 Metal bowl10-AFD20 to 406 Nylon bowl10-AFD20 to 408 Metal bowl with level gauge 10-AFD30, 40C With bowl guard 10-AFD20NoteJDrain guide 1/8 10-AFD20Drain guide 1/4 10-AFD30, 404)R Flow direction: Right to left 10-AFD20 to 40Name plate and cautionNote 5)Z plate for bowl in imperial 10-AFD20 to 40units (PSI, °F)When more than one specification is required, indicate in ascending alphanumerical order.Note 4) Without a valve function.Note 5) For NPT thread type.This product is for overseas use only according to the new Measurement Law.(The SI unit type is provided for use in Japan.): Combination available : Combination not available: Varies depending on the model : Available only with NPT threadAccessoryOptional specification Applicable micro mist separatorB 2 6 8 C J R Z 10-AFD20 10-AFD30, 40SymbolStandard specificationsModelPort sizeFluidProof pressureMaximum operating pressureMinimum operating pressureAmbient and fluid temperatureFiltration accuracyOutlet side oil mist concentrationRated flow {l/min (ANR)} Note 7)Drain capacity (cm 3 )Drain guide piping port10-AFD2010-AFD3010-AFD4010-AFD40-061/8, 1/4 1/4, 3/8 1/4, 3/8, 1/2 3/4Air1.5 MPa1.0 MPa0.05 MPa–5 to 60°C (with no freezing)0.01 µm (95% filtered particle size)Maximum 0.1mg/m 3 (ANR) Note 6) (before saturated with oil: 0.01 mg/m 3 (ANR) or less, approx. 0.008 ppm)12024060060082545451/81/41/41/4Note 6) When the compressor oil mist discharge concentration is 30 mg/m 3 (ANR).Note 7) When the inlet pressure is 0.7 MPa. The flow rate varies depending on the inlet pressure.Accessory part no.AccessoryApplicable modelBracket assembly Note 8)Note 8) Assembly includes a bracket and 2 mounting screws.10-AFD20AF20P-050AS10-AFD30AF30P-050AS10-AFD40AF40P-050AS10-AFD40-06AF40P-070AS5