Pneumatic Clean Series

454Clean Speed Controller with One-touch Fittings AS-FPQ/FPGSpecificationsAir Flow/Effective AreaModelTubing O.D. Metric sizeParticle generation gradeProof pressure (20°C)Max. operating pressure (20°C)Min. operating pressureAmbient and fluid temperatureNumber of needle rotationsNote 1) Refer to the particle generation grade classifications.Note 2) In case of AS121FPNote 3) The maximum operating pressure is the value at 20°C.Refer to operating pressure curve for values at other temperatures.AS121FP-M5 AS221FP-01ø4ø6ø4 ø6ø8AS221FP-02ø4 ø6 ø8ø10Grade 1 Note 1)1.5MPa1MPa Note 3)0.1MPa–5 to 60°C (No freezing)10 rotations (Note2) 8 rotations)AS321FP-03ø6 ø8 ø10ø12AS421FP-04ø10 ø12Controlled(Free) flowNote) Supply pressure: 0.5Mpa,Temperature: 20°CFlow rate l/min (ANR)Effective area mm 21001.51802.72303.5260439064607660107901292014158024171026Recommended Applicable TubingTubing materialTubing O.D.Clean series polyurethane tubing: Series 10-ø4, ø6, ø8, ø10, ø12Polyurethane tubing: Series TU, Nylon tubing: Series TSoft polyurethane tubing: Series TS is also applicable. However, the cleanliness performance will decline.Needle Valve/Flow CharacteristicsAS121FP-M5 AS221FP-01 AS221FP-0206,080408,100604Air Line EquipmentAS321FP-03AS421FP-0410,1212100806435