Pneumatic Clean Series

Compact Cylinder 10-CQ2/11-CQ28510-CQ2B32 to 50, 11-CQ2B32 to 50H screw depth C2-øN through2 X 2-øO recessed areaM5 X 0.8(Relief port)Q5.52-P(Piping port)FøIZøDKMEJLT1B+StrokeT2WA+Stroke(mm)Bore ABCsize 50ST or less 75,100ST 50ST or less 75,100STD E F H I J K L M N O P Q T1 T2 W Z Note1) Stroke range32 40 50 33 435.5 M5 X 0.8 21.5513 16 45 M8 X 1.25 60 4.5 14 7 34 5.5 97 7 49.5 147.5 Rc1/8 20.5 10 to 50,75,10040 46.5 56.5 39.5 49.5 13 16 52 8 M8 X 1.25 69 5 14 7 40 5.5 9 Rc1/8 21 6 7 57 14 5 to 50,75,10050 48.5 58.5 40.5 50.5 15 20 64 10.5 M10 X 1.5 86 7 17 8 50 6.6 11 Rc1/4 20.5 18 8 71 19 10 to 50,75,100Note1)A spacer of 5, 10, 15 or 20mm is attached to a 75 or 100mm stroke to make an intermediate stroke (55, 60, 65, 70 or 80, 85, 90, 95). Therefore it will have thesame dimensions as the 75 or 100mm stroke.Rod End Male Thread2-øN through2 X 2-øO recessed areaM5 X 0.8(Relief port)Q5.52-P(Piping port)FøIWidth across flats KHZøDHexagon widthacross flats B1H1CMEWJXLT1B+StrokeA+StrokeT2(mm)Bore ABB1size 50ST or less 75,100ST 50ST or less 75,100STC D E F H H1 I J K L M N O P Q T1 T2 W X Z Note1) Stroke range32 61.5 71.5 33 435.5 M5 X 0.8 21.522 16 45 M14 X 1.5 8 60 4.5 14 28.5 34 5.523.57.5 Rc1/8 20.5 7 7 49.5520.591410 to 50,75,10040 68 78 39.5 49.5 22 20.5 16 52 8 M14 X 1.5 8 69 5 14 28.5 40 5.5 9 Rc1/8 21 6 7 57 23.5 14 5 to 50,75,10050 74 84 40.5 50.5 27 26 20 64 10.5 M18 X 1.5 11 86 7 17 33.5 50 6.6 11 Rc1/4 20.5 18 8 71 28.5 19 10 to 50,75,100Note1)A spacer of 5, 10, 15 or 20mm is attached to a 75 or 100mm stroke to make an intermediate stroke (55, 60, 65, 70 or 80, 85, 90, 95). Therefore it will have thesame dimensions as the 75 or 100mm stroke.66