Pneumatic Clean Series

Solenoid Valve 10-VQ1000/2000417VQ2000/Body Ported TypeFlip Plug Lead UnitHow to Order ManifoldsClean seriesSeries VQ2000Plug lead unitValve stationsThe number of maximum stations differs from kit to kit.(Refer to the table below.)10 - V V 5 Q 2 4 - 08 A F S1 - D NP,R port sizeA: For ø6 One-touch fittingB: Rc1/4 threadKit designation/Electrical entry direction/Cable lengthRefer to the figure below.OptionNil — NoneD — DIN rail mount type Note 2)K — Special wiring specification(Except double wiring) Note 3)N — Name plateNote 1) When more than one option is specified, listthem in alphabetical order (e.g. -DKN).Note 2) Specify "-D" for F, P and S kits, which comewith a DIN rail.Note 3) Indicate the wiring specification on a manifoldspecification sheet (Except C kit).Kit Designation/Electrical Entry Direction/Cable LengthF Kit (D-sub Connector Kit)P Kit (Flat Ribbon Cable Kit)Side entrySide entryNote 1)25PNote 1)26PTop entryTop entryNote 1)25PNote 1)26PConnector entryTop entry Side entryFKitU0U1U2U3FKitS0S1S2S3Without cableWith 1.5 m cableWith 3 m cableWith 5 m cableNote 2)Maximum8 stationsNote 1) Besides the above, F kits with different number of pins are available.Note 2) Using special wiring, semi-standard specifications with a larger maximum number ofstations are available.Connector entryTop entry Side entryPKitU0U1U2U3PKitS0S1S2S3Without cableWith 1.5 m cableWith 3 m cableWith 5 m cableNote 2)Maximum8 stationsNote 1) Besides the above, P kits with different number of pins are available.Note 2) Using special wiring, semi-standard specifications with a larger maximum number ofstations are available.398