Pneumatic Clean Series

Series 10-SY1003 Port Solenoid ValveDirect Operated Type363How to OrderStandard (Cv0.008)Clean seriesActuation1 — Normally closed (N.C.)2 — Normally open (N.O.)Light/surge suppresserNil — Without light/surge suppresserS — With surge suppresserR — With surge suppresser (Non-polar type)Z — With light/surge suppresserU — With light/surge suppresser (Non-polar type)∗ For AC voltage valves, there is no "S" option.It is already built into the rectifier.Piping specificationsNil — For manifoldP — P,R,A portFor direct pipingBracketNil — Without bracketF — With bracketFor only PM3BodyPorted TypeBaseMounted Type10 - SY1 1 3 - 5 L - M3 -10 - SY1 1 4 - 5 M -Rated voltageDC specifications5 — 24VDC6 — 12VDCV — 6VDCS — 5VDCR — 3VDCAC specifications (50/60Hz)1 — 100VAC2 — 200VAC3 — 110VAC [115VAC]4 — 220VAC [230VAC]Port sizeNil — Without sub-plate(With gasket and screw)M3 — With sub-plateManual overrideNiI — Non-locking push typeB — Slotted locking typeD — Push-turn locking slotted typeE — Push-turn locking lever typeElectrical entry24V,12V,6V,5V,3VDC100V,110V,200V,220VACGrommetG — Lead wireLength 300mmH — Lead wireLength 600mmL plug connectorL — With lead wireLength 300mmLN — Without lead wireLO — Without connectorM plug connectorM — With lead wireLength 300mmMN — Without lead wireMO — Without connector∗ Types LN and MN include2 sockets.CautionBe sure to read before handling. Refer to pages 7 to 16 of Front matter for safety instructions and commonprecautions for clean series and pages 236 to 238 for common precautions for directional control valve.344